Airworthiness Directive 2025-02-13
recurringAirworthiness Directives; The Boeing Company Airplanes
What this AD requires
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 757-200, -200CB, and -200PF series airplanes. This AD was prompted by a report indicating an operator has found cracks on three Model 757-200PF airplanes at the main deck cargo door cutout forward and aft hinge attachment holes. This AD requires a maintenance record check for repairs at the forward and aft hinge areas of the main deck cargo door cutout; repetitive open-hole high frequency eddy current (HFEC) inspections for cracks in the unrepaired areas of the bear strap, skin, doubler, and upper sill chord at the main deck cargo door forward and aft hinge attachment holes; and applicable corrective actions. The FAA is issuing this AD to address the unsafe condition on these products.
Which aircraft AD 2025-02-13 applies to
Applies to airplanes identified in Boeing Alert Requirements Bulletin 757-53A0106 RB, dated January 3, 2023, or airplanes converted to a freighter configuration using STC ST03562AT, ST03952AT, or ST04242AT.
Whether AD 2025-02-13 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.