TailplateTailplate
Run a report

Airworthiness Directive 2025-02-02

recurring
Official AD 2025-02-02 · FR doc 2025-02383 · 2025-02-10 · airframe

Airworthiness Directives; The Boeing Company Airplanes

What this AD requires

The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. This AD was prompted by a report indicating cracks in the frame inner chord and web at station (STA) 727. This AD requires an inspection for any repair installed, repetitive inspections of the frame inner chord and web at STA 727 for any crack, and applicable on- condition actions. The FAA is issuing this AD to address the unsafe condition on these products.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2025-02-02 applies to

MakesThe Boeing Company
Models737-100, 737-200, 737-200C, 737-300, 737-400, 737-500, 737

Installation of STC ST01219SE does not affect the ability to accomplish the AD's required actions; no AMOC approval needed for airplanes with STC ST01219SE installed.

Whether AD 2025-02-02 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD 2025-02-02 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.