TailplateTailplate
Run a report

Airworthiness Directive 2025-01-01

one-time
Official AD 2025-01-01 · FR doc 2025-02187 · 2025-02-04 · airframe

Airworthiness Directives; Britten-Norman Aerospace Ltd. Airplanes

What this AD requires

The FAA is adopting a new airworthiness directive (AD) for certain Britten-Norman Aerospace Ltd. Model BN-2, BN-2A, BN-2A-2, BN- 2A-3, BN-2A-6, BN-2A-8, BN-2A-9, BN-2A-20, BN-2A-21, BN-2A-26, BN-2A- 27, BN-2B-20, BN-2B-21, BN-2B-26, BN-2B-27, BN-2T, BN2T-4R, and BN2T-4S airplanes; and certain Model BN2A MK. III, BN2A MK. III-2, and BN2A MK. III-3 airplanes. This AD was prompted by the determination that, in order to ensure the continued structural integrity of certain landing gear and associated components, it is necessary to require removal of these components from service prior to exceeding established fatigue lives. This AD requires determining the number of landings on affected main landing gears (MLGs), nose landing gears (NLGs), and associated components; removing from service any part that has reached or exceeded the established fatigue life and installing a replacement part; and prohibiting the installation of any affected part unless the number of landings for that part is below the established fatigue life. The FAA is issuing this AD to address the unsafe condition on these products.

Which aircraft AD 2025-01-01 applies to

MakesBritten-Norman Aerospace Ltd.
ModelsBN-2, BN-2A, BN-2A-2, BN-2A-3, BN-2A-6, BN-2A-8, BN-2A-9, BN-2A-20, BN-2A-21, BN-2A-26, BN-2A-27, BN-2B-20, BN-2B-21, BN-2B-26, BN-2B-27, BN-2T, BN2T-4R, BN2T-4S, BN2A MK. III, BN2A MK. III-2, BN2A MK. III-3, BN-2B, BN2T

Applies to airplanes fitted with Fairey Hydraulics Ltd or Britten-Norman Aircraft landing gear and associated landing gear components.

Whether AD 2025-01-01 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD 2025-01-01 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.