TailplateTailplate
Run a report

Airworthiness Directive 2024-25-06

recurring
Official AD 2024-25-06 · FR doc 2024-29539 · 2024-12-13 · airframe

Airworthiness Directives; Airbus SAS Airplanes

What this AD requires

The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A318 series airplanes; Model A319-111, -112, -113, - 114, -115, -131, -132, -133, -151N, -153N, and -171N airplanes; Model A320 series airplanes; and Model A321 series airplanes. This AD was prompted by reports of jamming of, or inability to open, the main landing gear (MLG) door during maintenance operations. This AD requires repetitive inspection of the MLG doors, and, depending on findings, accomplishment of applicable corrective actions, and prohibits the installation of affected parts as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.

Repetitive inspection. Re-inspect every 12 months. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2024-25-06 applies to

MakesAirbus Sas
ModelsA318-111, A318-112, A318-121, A318-122, A319-111, A319-112, A319-113, A319-114, A319-115, A319-131, A319-132, A319-133, A319-151N, A319-153N, A319-171N, A320-211, A320-212, A320-214, A320-216, A320-231, A320-232, A320-233, A320-251N, A320-252N, A320-253N, A320-271N, A320-272N, A320-273N, A321-111, A321-112, A321-131, A321-211, A321-212, A321-213, A321-231, A321-232, A321-251N, A321-252N, A321-253N, A321-271N, A321-272N, A321-251NX, A321-252NX, A321-253NX, A321-253NY, A321-271NX, A321-272NX, A318, A319, A320, A321

Whether AD 2024-25-06 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD 2024-25-06 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.