Airworthiness Directive 2024-24-03
recurringAirworthiness Directives; The Boeing Company Airplanes
What this AD requires
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model MD-11 and MD-11F airplanes. This AD was prompted by a report of a Model MD-11F airplane experiencing an uncommanded deployment of a thrust reverser in flight at low altitude. This AD requires initial and repetitive detailed inspections and repetitive wire integrity tests of the engine pylon thrust reverser control system wire harnesses, junction box assembly and junction box cover, left-side and right-side thrust reverser electrical harnesses, core (engine compartment) miscellaneous wire harness assembly, and 30- degree bulkhead wire harness assembly; and applicable on-condition actions. This AD also requires reporting inspection results. The FAA is issuing this AD to address the unsafe condition on these products.
Which aircraft AD 2024-24-03 applies to
Applies to airplanes equipped with General Electric (GE) CF6-80C2D1F high-bypass turbofan engines.
Whether AD 2024-24-03 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.