Airworthiness Directive 2024-23-03

one-time
Official AD 2024-23-03 · FR doc 2024-28134 · 2024-12-02 · airframe

Airworthiness Directives; The Boeing Company Airplanes

What this AD requires

The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 737-300 and -400 series airplanes. This AD was prompted by a report that flight control rigging tolerances could result in spoiler deflection not reaching the minimal level required to engage the cruise thrust split monitor (MONFD) used by the autothrottle (A/T) system. This AD requires changing certain wire bundles, installing a new housing assembly, removing the mechanical aileron force limiter (MAFL), doing an inspection or records check to determine if certain flight control computers (FCCs) are installed, and performing applicable on-condition actions. The FAA is issuing this AD to address the unsafe condition on these products.

Which aircraft AD 2024-23-03 applies to

MakesThe Boeing Company
Models737-300, 737-400, 737

Applies to airplanes as identified in Boeing Alert Requirements Bulletin 737-22A1399 RB, dated April 13, 2023.

Whether AD 2024-23-03 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of complianceThe specific action taken (inspected, replaced, modified) and to what revision.
DateWhen the work was done.
Aircraft timeTotal time in service / tach at compliance — how recurring next-due is computed.
Signature & certificateThe A&P/IA who returned it to service, with certificate number.
Is AD 2024-23-03 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.