TailplateTailplate
Run a report

Airworthiness Directive 2024-23065

recurring
AD 2024-23065 · 2024-10-07 · airframe

Airworthiness Directives; Leonardo S.p.a. Helicopters

What this AD requires

The FAA is superseding Airworthiness Directive (AD) 2021-22- 05, which applied to all Leonardo S.p.a. (Leonardo) Model A119 and AW119 MKII helicopters. AD 2021-22-05 required repetitively inspecting certain torque tube assemblies for any deficiency and corrective action if necessary, and replacing any affected part with a serviceable part, which was terminating action for the repetitive inspections. AD 2021- 22-05 was prompted by reports of abnormal play on the collective torque tube on two Leonardo Model AW119 MKII helicopters, which were due to an erroneous manufacturing process. Since the FAA issued AD 2021-22-05, it was discovered that additional torque tube assemblies are subject to the unsafe condition. This AD retains certain requirements specified in AD 2021-22-05, reduces the applicability to include helicopters with only affected part-numbered collective torque tube assemblies, reduces the inspection intervals, and removes the previously approved terminating action. These requirements are specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2024-23065 applies to

MakesLeonardo S.P.A.
ModelsAW119 MKII, A119, AW119

Applies as identified in European Union Aviation Safety Agency AD 2023-0035, dated February 10, 2023 (EASA AD 2023-0035).

Whether AD 2024-23065 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD 2024-23065 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.