Is AD 2024-10-14 a recurring Airworthiness Directive?

Yes — AD 2024-10-14 requires a repetitive inspection. Next-due depends on the aircraft's time in service.

Airworthiness Directive 2024-10-14

Q: Which aircraft does AD 2024-10-14 apply to?

AD 2024-10-14 applies to Rolls-Royce Deutschland Ltd & Co Kg — models Trent 1000-A, Trent 1000-AE, Trent 1000-C, Trent 1000-CE, Trent 1000-D, Trent 1000-E, Trent 1000-G, Trent 1000-H. Serial/part conditions may narrow it to specific aircraft.

recurring

Official AD 2024-10-14 · FR doc 2024-14945 · 2024-07-09 · turbine engine

Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG

What this AD requires

The FAA is adopting a new airworthiness directive (AD) for all Rolls-Royce Deutschland Ltd & Co KG (RRD) Trent 1000-A, Trent 1000-AE, Trent 1000-C, Trent 1000-CE, Trent 1000-D, Trent 1000-E, Trent 1000-G, and Trent 1000-H engines. This AD is prompted by reports of cracking and separation of certain low-pressure turbine (LPT) stage 1 blade assemblies. This AD requires initial and repetitive inspections of affected LPT stage 1 blade assemblies for cracking or separation and, depending on the results of the inspections, reduction of the inspection interval or replacement of the LPT stage 1 blade set and disk. This AD also prohibits the installation of an LPT disk or blade set assembly unless it is considered a serviceable part, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2024-10-14 applies to

MakesRolls-Royce Deutschland Ltd & Co Kg

ModelsTrent 1000-A, Trent 1000-AE, Trent 1000-C, Trent 1000-CE, Trent 1000-D, Trent 1000-E, Trent 1000-G, Trent 1000-H, Trent 1000

Whether AD 2024-10-14 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.

Date — When the work was done.

Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.

Signature & certificate — The A&P/IA who returned it to service, with certificate number.

Is AD 2024-10-14 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.