Airworthiness Directive 2024-12-07

recurring
Official AD 2024-12-07 · FR doc 2024-13936 · 2024-06-26 · airframe

Airworthiness Directives; The Boeing Company Airplanes

What this AD requires

The FAA is adopting a new airworthiness directive (AD) for The Boeing Company Model 757-200 airplanes modified by particular supplemental type certificates. This AD was prompted by reports of cracking in the structure in and around the lavatory service panel. This AD requires repetitively inspecting the lavatory service panel, access pan, and attaching structure for cracks; reinforcing the attaching structure; and if necessary, replacing the access pan or repairing cracked parts. The FAA is issuing this AD to address the unsafe condition on these products.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2024-12-07 applies to

MakesThe Boeing Company
Models757-200, 757
Part-conditionalST01529SE, ST02278SE.

Applies only to airplanes modified by Supplemental Type Certificate ST01529SE or ST02278SE.

Whether AD 2024-12-07 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of complianceThe specific action taken (inspected, replaced, modified) and to what revision.
DateWhen the work was done.
Aircraft timeTotal time in service / tach at compliance — how recurring next-due is computed.
Signature & certificateThe A&P/IA who returned it to service, with certificate number.
Is AD 2024-12-07 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.