Airworthiness Directive 2024-10-04
one-timeAirworthiness Directives; Piper Aircraft, Inc. Airplanes
What this AD requires
The FAA is adopting a new airworthiness directive (AD) for certain Piper Aircraft, Inc. (Piper) Model PA-28-181, PA-28R-201, PA- 34-220T, and PA-44-180 airplanes. This AD was prompted by a report of a double-drilled bolt hole of the rear wing spar attachment fitting found during an unscheduled inspection of an airplane due to a ground collision with an automobile. This AD requires inspecting the rear wing spar attachment fitting and, if discrepancies are found, inspecting the forward wing spar attachment fitting, accomplishing corrective actions as required, and reporting to the FAA when corrective actions are required. The FAA is issuing this AD to address the unsafe condition on these products.
Which aircraft AD 2024-10-04 applies to
Applies only to serial numbers identified in Piper Service Bulletin No. 1413, dated April 9, 2024.
Whether AD 2024-10-04 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.