TailplateTailplate
Run a report

Airworthiness Directive 2024-07-02

one-time
Official AD 2024-07-02 · FR doc 2024-09564 · 2024-05-06 · turbine engine

Airworthiness Directives; CFM International, S.A. Engines

What this AD requires

The FAA is adopting a new airworthiness directive (AD) for CFM International, S.A. (CFM) Model LEAP-1A23, LEAP-1A24, LEAP-1A24E1, LEAP-1A26, LEAP-1A26CJ, LEAP-1A26E1, LEAP-1A29, LEAP-1A29CJ, LEAP-1A30, LEAP-1A32, LEAP-1A33, LEAP-1A33B2, and LEAP-1A35A engines. This AD was prompted by detection of melt-related freckles in the billet, which may reduce the life of certain high-pressure turbine (HPT) rotor interstage seals. This AD requires removing the affected HPT rotor interstage seals from service and replacing with a part eligible for installation. The FAA is issuing this AD to address the unsafe condition on these products.

Which aircraft AD 2024-07-02 applies to

MakesCfm International, S.A.
ModelsLEAP-1A23, LEAP-1A24, LEAP-1A24E1, LEAP-1A26, LEAP-1A26CJ, LEAP-1A26E1, LEAP-1A29, LEAP-1A29CJ, LEAP-1A30, LEAP-1A32, LEAP-1A33, LEAP-1A33B2, LEAP-1A35A, LEAP

Whether AD 2024-07-02 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD 2024-07-02 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.