Is AD 2024-01218 a recurring Airworthiness Directive?

No — AD 2024-01218 is a one-time directive. Verify it was complied with in the aircraft's records.

Which aircraft does AD 2024-01218 apply to?

AD 2024-01218 applies to Ge Aviation Czech S.R.O. — models H75-100, H75-200, H80, H80-100, H80-200, H85-100, H85-200, H75. Serial/part conditions may narrow it to specific aircraft.

Airworthiness Directive 2024-01218

one-time

AD 2024-01218 · 2024-01-23 · turboprop engine

Airworthiness Directives; GE Aviation Czech s.r.o. (Type Certificate Previously Held by WALTER Engines a.s., Walter a.s., and MOTORLET a.s.) Engines

What this AD requires

The FAA is superseding Airworthiness Directive (AD) 2023-01- 07 for all GE Aviation Czech s.r.o. (GEAC) (type certificate previously held by WALTER Engines a.s., Walter a.s., and MOTORLET a.s.) Model H75- 100, H75-200, H80, H80-100, H80-200, H85-100, and H85-200 engines. AD 2023-01-07 required revising the airworthiness limitations section (ALS) of the existing engine maintenance manual (EMM) and the operator's existing approved maintenance or inspection program, as applicable, to incorporate updated coefficients and recalculate the cycles accumulated on critical parts. Since the FAA issued AD 2023-01- 07, the manufacturer revised the ALS of the EMM to introduce new and more restrictive airworthiness limitations and associated thresholds and intervals for life-limited parts, which prompted this AD action. This AD requires revising the ALS of the existing EMM and the operator's existing approved engine maintenance or inspection program, as applicable, to incorporate new and more restrictive instructions and associated thresholds and intervals for life-limited parts, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference (IBR). The FAA is issuing this AD to address the unsafe condition on these products.

Which aircraft AD 2024-01218 applies to

MakesGe Aviation Czech S.R.O.

ModelsH75-100, H75-200, H80, H80-100, H80-200, H85-100, H85-200, H75, H85

Type certificate previously held by WALTER Engines a.s., Walter a.s., and MOTORLET a.s.

Whether AD 2024-01218 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.

Date — When the work was done.

Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.

Signature & certificate — The A&P/IA who returned it to service, with certificate number.

Is AD 2024-01218 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.