TailplateTailplate
Run a report

Airworthiness Directive 2023-23-14

one-time
Official AD 2023-23-14 · FR doc 2023-26367 · 2023-11-30 · airframe

Airworthiness Directives; The Boeing Company Airplanes

What this AD requires

The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 747 airplanes. This AD was prompted by reports of latent failures of the lightning protection features for the engine fuel feed system. This AD requires an inspection for damage and a measurement of the electrical bonding resistance of the out-tank fuel feed tube bonding jumper in the strut for each of the four engines, a measurement of the electrical bonding resistance of the forward side of the front spar bulkhead fitting adapter for each of the four engines, and applicable related investigative and corrective actions. The FAA is issuing this AD to address the unsafe condition on these products.

Which aircraft AD 2023-23-14 applies to

MakesBoeing
Models747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747-400, 747-400D, 747-400F, 747SR, 747SP, 747-8F, 747-8, 747

Whether AD 2023-23-14 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD 2023-23-14 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.