Is AD 2023-18-06 a recurring Airworthiness Directive?

Yes — AD 2023-18-06 requires a repetitive inspection. Next-due depends on the aircraft's time in service.

Which aircraft does AD 2023-18-06 apply to?

AD 2023-18-06 applies to Boeing — models 747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747-400. Serial/part conditions may narrow it to specific aircraft.

Airworthiness Directive 2023-18-06

recurring

Official AD 2023-18-06 · FR doc 2023-21718 · 2023-10-03 · airframe

Airworthiness Directives; The Boeing Company Airplanes

What this AD requires

The FAA is superseding Airworthiness Directive (AD) 2021-02- 15, which applied to certain The Boeing Company Model 747-100, 747- 100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747-400, 747-400D, 747-400F, and 747SR series airplanes. AD 2021-02-15 required repetitive replacement of certain parts; an inspection to determine production configuration for certain parts; repetitive lubrication of certain parts and a repetitive inspection of certain parts for any exuding grease; repetitive inspections of certain parts for loose or missing attachment bolts, cracks or bushing migration, cracks or gouges, or broken, binding, or missing rollers; repetitive inspections of certain parts for cracks or corrosion; repetitive lubrication; and on-condition actions if necessary. This AD was prompted by the FAA's determination that certain compliance times must be reduced in order to address the unsafe condition. This AD continues to require the actions specified in AD 2021-02-15 with certain reduced compliance times. The FAA is issuing this AD to address the unsafe condition on these products.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2023-18-06 applies to

MakesBoeing

Models747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747-400, 747-400D, 747-400F, 747SR, 747

Configuration as identified in Boeing Alert Requirements Bulletin 747-57A2367 RB, Revision 1, dated March 20, 2023.

Whether AD 2023-18-06 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.

Date — When the work was done.

Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.

Signature & certificate — The A&P/IA who returned it to service, with certificate number.

Is AD 2023-18-06 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.