TailplateTailplate
Run a report

Airworthiness Directive 2023-17-14

recurring
Official AD 2023-17-14 · FR doc 2023-18835 · 2023-08-31 · airframe

Airworthiness Directives; The Boeing Company Airplanes

What this AD requires

The FAA is superseding Airworthiness Directive (AD) 2022-18- 11, which applied to all The Boeing Company Model 777 airplanes. AD 2022-18-11 required repetitive inspections for cracking of the left- and right-side ring chords, repair angles, front spar lower chords, and front spar webs (depending on configuration) common to a certain underwing longeron; modification of the front spar lower chord for some airplanes; repetitive post-modification inspections; and applicable on- condition actions. This AD was prompted by a report of a crack found in a front spar lower chord, and the determination that errors in the service information mandated by AD 2022-18-11 introduced a new unsafe condition related to the application of certain fastener cap seals. This AD retains the actions required by AD 2022-18-11, and requires a maintenance records review of previously modified airplanes for the procedures used during that modification, and applicable corrective actions. The FAA is issuing this AD to address the unsafe condition on these products.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2023-17-14 applies to

MakesBoeing
Models777-200, 777-200LR, 777-300, 777-300ER, 777F, 777

Excludes Model 777-200 series airplanes having a maximum taxi weight equal to or less than 547,000 pounds, and Model 777F series airplanes with manufacturer line numbers of 1743 and subsequent.

Whether AD 2023-17-14 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD 2023-17-14 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.