TailplateTailplate
Run a report

Airworthiness Directive 2023-06-08

recurring
Official AD 2023-06-08 · FR doc 2023-07752 · 2023-04-13 · airframe

Airworthiness Directives; Airbus SAS Airplanes

What this AD requires

The FAA is superseding Airworthiness Directive (AD) 2019-18- 07, which applied to certain Airbus SAS Model A319-111, -112, -113, - 114, -115, -131, -132, and -133 airplanes; Model A320-211, -212, -214, -216, -231, -232, and -233 airplanes; and Model A321-111, -112, -131, - 211, -212, -213, -231, and -232 airplanes. AD 2019-18-07 required repetitive rototest inspections of the open tack holes and rivet holes at the cargo floor support fittings of the fuselage, including doing all applicable related investigative actions and repair if necessary. AD 2019-18-07 also adds actions (modification) for certain airplanes. Since the FAA issued AD 2019-18-07, it was determined that certain airplanes need to do additional work. This AD continues to require the actions in AD 2019-18-07 and requires additional work for certain airplanes, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2023-06-08 applies to

MakesAirbus Sas
ModelsA319-111, A319-112, A319-113, A319-114, A319-115, A319-131, A319-132, A319-133, A320-211, A320-212, A320-214, A320-216, A320-231, A320-232, A320-233, A321-111, A321-112, A321-131, A321-211, A321-212, A321-213, A321-231, A321-232, A319, A320, A321

Applicability as identified in EASA AD 2022-0115, dated June 20, 2022.

Whether AD 2023-06-08 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD 2023-06-08 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.