TailplateTailplate
Run a report

Airworthiness Directive 2022-24-13

one-time
Official AD 2022-24-13 · FR doc 2022-27017 · 2022-12-14 · airframe

Airworthiness Directives; Airbus SAS Airplanes

What this AD requires

The FAA is superseding Airworthiness Directive (AD) 2021-22- 04, which applied to all Airbus SAS Model A318-111, -112, -121, and - 122 airplanes, Model A319-111, -112, -113, -114, -115, -131, -132, and -133 airplanes, Model A320-211, -212, -214, -216, -231, -232, and -233 airplanes, and Model A321-111, -112, -131, -211, -212, 213, -231, and - 232 airplanes. AD 2021-22-04 required a one-time eddy current conductivity measurement of certain structural parts of the outer flaps to determine if the incorrect alloy was used, and replacement if necessary; and also required a one-time eddy current conductivity measurement of certain other structural parts of the outer flaps to determine if the parts were properly heat treated, and replacement if necessary. This AD was prompted by the issuance of an updated list of suspected parts, including those that may have been improperly heat treated. This AD continues to require the actions in AD 2021-22-04, and requires using an updated list of suspected parts, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. This AD also limits the installation of affected parts. The FAA is issuing this AD to address the unsafe condition on these products.

Which aircraft AD 2022-24-13 applies to

MakesAirbus
ModelsA318-111, A318-112, A318-121, A318-122, A319-111, A319-112, A319-113, A319-114, A319-115, A319-131, A319-132, A319-133, A320-211, A320-212, A320-214, A320-216, A320-231, A320-232, A320-233, A321-111, A321-112, A321-131, A321-211, A321-212, A321-213, A321-231, A321-232, A318, A319, A320, A321

Whether AD 2022-24-13 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD 2022-24-13 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.