Is AD 2022-26971 a recurring Airworthiness Directive?

No — AD 2022-26971 is a one-time directive. Verify it was complied with in the aircraft's records.

Which aircraft does AD 2022-26971 apply to?

AD 2022-26971 applies to Airbus Canada — models BD-500-1A10, BD-500-1A11, BD-500. Serial/part conditions may narrow it to specific aircraft.

Airworthiness Directive 2022-26971

one-time

AD 2022-26971 · 2022-12-12 · airframe

Airworthiness Directives; Airbus Canada Limited Partnership (Type Certificate Previously Held by C Series Aircraft Limited Partnership (CSALP); Bombardier, Inc.) Airplanes

What this AD requires

The FAA is adopting a new airworthiness directive (AD) for all Airbus Canada Limited Partnership Model BD-500-1A10 and BD-500-1A11 airplanes. The FAA previously sent this AD as an emergency AD to all known U.S. owners and operators of these airplanes. This AD was prompted by reports of the autopilot/autothrottle system design resulting in inadvertent engagement of the autopilot when the flightcrew was attempting to engage the autothrottle late into the take-off phase or when attempting to re-engage the autothrottle during takeoff after uncommanded disconnect. This AD requires revising the Limitations section of the existing airplane flight manual (AFM) by revising the title of the existing autopilot AFM limitation, include a new warning prior to the existing autopilot engagement limitations, and include a new limitation prohibiting selecting or reselecting autothrottle during takeoff after thrust levers are advanced to the takeoff setting after the existing autopilot engagement limitations. The FAA is issuing this AD to address the unsafe condition on these products.

Which aircraft AD 2022-26971 applies to

MakesAirbus Canada

ModelsBD-500-1A10, BD-500-1A11, BD-500

Type Certificate previously held by C Series Aircraft Limited Partnership (CSALP); Bombardier, Inc.

Whether AD 2022-26971 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.

Date — When the work was done.

Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.

Signature & certificate — The A&P/IA who returned it to service, with certificate number.

Is AD 2022-26971 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.