Is AD 2022-22-11 a recurring Airworthiness Directive?

No — AD 2022-22-11 is a one-time directive. Verify it was complied with in the aircraft's records.

Airworthiness Directive 2022-22-11

Q: Which aircraft does AD 2022-22-11 apply to?

AD 2022-22-11 applies to Airbus Sas — models A319-151N, A319-153N, A319-171N, A320-251N, A320-252N, A320-253N, A320-271N, A320-272N. Serial/part conditions may narrow it to specific aircraft.

one-time

Official AD 2022-22-11 · FR doc 2022-25511 · 2022-11-25 · airframe

Airworthiness Directives; Airbus SAS Airplanes

What this AD requires

The FAA is superseding Airworthiness Directive (AD) 2021-14- 08, which applied to all Airbus SAS Model A319-151N, A319-153N, A319- 171N, A320-251N, A320-252N, A320-273N, A321-251N, A321-251NX, A321- 252N, A321-252NX, A321-253N, A321-253NX, A321-271N, A321-271NX, A321- 272N, and A321-272NX airplanes. AD 2021-14-08 required revising the existing airplane flight manual (AFM) to include a procedure to reinforce the airspeed check during the take-off phase and provide instructions to abort take-off in certain cases. This AD was prompted by the development of a software update to the elevator aileron computer (ELAC) to address the unsafe condition. This AD continues to require the actions in AD 2021-14-08 and requires replacing each affected ELAC and removing the AFM revision required by AD 2021-14-08, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. This AD also prohibits the installation of affected parts. The FAA is issuing this AD to address the unsafe condition on these products.

Which aircraft AD 2022-22-11 applies to

MakesAirbus Sas

ModelsA319-151N, A319-153N, A319-171N, A320-251N, A320-252N, A320-253N, A320-271N, A320-272N, A320-273N, A321-251N, A321-251NX, A321-252N, A321-252NX, A321-253N, A321-253NX, A321-271N, A321-271NX, A321-272N, A321-272NX, A319, A320, A321

Whether AD 2022-22-11 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.

Date — When the work was done.

Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.

Signature & certificate — The A&P/IA who returned it to service, with certificate number.

Is AD 2022-22-11 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.