Airworthiness Directive 2022-17-02
recurringAirworthiness Directives; CFM International, S.A. Turbofan Engines
What this AD requires
The FAA is adopting a new airworthiness directive (AD) for certain CFM International, S.A. (CFM) LEAP-1B model turbofan engines. This AD was prompted by multiple commanded in-flight shutdowns (IFSDs) due to inner radial drive shaft (RDS) failure. This AD requires initial and repetitive inspections of the transfer gearbox (TGB) scavenge screens and, depending on the results of the inspections, replacement or rework of the affected inner RDS. As a mandatory terminating action to the initial and repetitive inspections of the TGB scavenge screens, this AD requires replacement or rework of the affected inner RDS. This AD also prohibits the installation of an engine with an affected inner RDS onto an airplane that already has one engine with an affected inner RDS installed. The FAA is issuing this AD to address the unsafe condition on these products.
Which aircraft AD 2022-17-02 applies to
Applies only to engines with an installed inner radial drive shaft (RDS) with a serial number listed in CFM Service Bulletin LEAP-1B-72-00-0365-01A-930A-D, Issue 003-00, dated April 26, 2022.
Whether AD 2022-17-02 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.