Airworthiness Directive 2022-15-09
recurringAirworthiness Directives; The Boeing Company Airplanes
What this AD requires
The FAA is superseding Airworthiness Directive (AD) 2019-23- 06, which applied to certain The Boeing Company Model 757-200, -200CB, and -300 series airplanes. AD 2019-23-06 required, depending on configuration, a general visual inspection for any previous repair, such as any reinforcing repair or local frame replacement repair, repetitive open hole high frequency eddy current (HFEC) inspections for any crack of the fuselage frame web fastener holes, on the left and right side of the airplane, and applicable on-condition actions. This AD was prompted by a determination that certain compliance times must be reduced. This AD requires the actions specified in AD 2019-23-06 with reduced compliances times for certain actions. The FAA is issuing this AD to address the unsafe condition on these products.
Which aircraft AD 2022-15-09 applies to
Applies to airplanes as identified in Boeing Alert Requirements Bulletin 757-53A0112 RB, Revision 1, dated June 17, 2022.
Whether AD 2022-15-09 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.