TailplateTailplate
Run a report

Airworthiness Directive 2022-12-05

recurring
Official AD 2022-12-05 · FR doc 2022-16101 · 2022-07-29 · airframe

Airworthiness Directives; Airbus SAS Airplanes

What this AD requires

The FAA is superseding Airworthiness Directive (AD) 2020-26- 01, which applied to all Airbus SAS Model A318-111, -112, -121, and - 122 airplanes; Model A319-111, -112, -113, -114, -115, -131, -132, and -133 airplanes; and Model A320-211, -212, -214, -216, -231, -232, and - 233 airplanes. AD 2020-26-01 required repetitive general visual inspections of the affected main landing gear (MLG) sliding tubes for cracks, and replacement if necessary. This AD was prompted by reports of cracks found on MLG sliding tubes that may have been subject to improperly performed magnetic particle inspection. This AD requires repetitive general visual inspections of the affected MLG sliding tubes (both retained affected parts and additional affected parts) for cracks, and replacement if necessary, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. This AD also adds airplanes to the applicability. The FAA is issuing this AD to address the unsafe condition on these products.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2022-12-05 applies to

MakesAirbus Sas
ModelsA318-111, A318-112, A318-121, A318-122, A319-111, A319-112, A319-113, A319-114, A319-115, A319-131, A319-132, A319-133, A320-211, A320-212, A320-214, A320-216, A320-231, A320-232, A320-233, A321-111, A321-112, A321-131, A321-211, A321-212, A321-213, A321-231, A321-232, A318, A319, A320, A321

Whether AD 2022-12-05 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD 2022-12-05 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.