Airworthiness Directive 2022-12870
recurringAirworthiness Directives; British Aerospace (Operations) Limited and British Aerospace Regional Aircraft Airplanes
What this AD requires
The FAA is superseding Airworthiness Directive (AD) 2017-15-06 for all British Aerospace Regional Aircraft Model HP.137 Jetstream Mk.1, Jetstream Series 200 and 3101, and Jetstream Model 3201 airplanes. AD 2017-15-06 required repetitively inspecting the main landing gear (MLG) for cracks and, if cracks were found, replacing the MLG with an airworthy part. Since the FAA issued AD 2017-15-06, the Civil Aviation Authority (CAA) of the United Kingdom (UK) superseded the mandatory continuing airworthiness information (MCAI) issued by the European Aviation Safety Agency (EASA) to correct an unsafe condition on these products. This AD retains the initial inspection and the calculation of hours time-in-service to flight cycle actions required by AD 2017-15-06, but decreases the repetitive inspection interval time from 1,200 flight cycles to 900 flight cycles. The FAA is issuing this AD to address the unsafe condition on these products.
Which aircraft AD 2022-12870 applies to
Applies to all serial numbers of the listed models.
Whether AD 2022-12870 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
Supersession
Supersedes AD 2017-15-06.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.