Airworthiness Directive 2022-02-14
recurringAirworthiness Directives; The Boeing Company Airplanes
What this AD requires
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 787-8, 787-9, and 787-10 airplanes. This AD was prompted by a report that during a fleet sampling inspection, cracks were found on the inner cylinder pivot pins of the left and right main landing gear (MLG) on one of the airplanes. This AD requires repetitive lubrications of the left and right MLG truck beams and inner cylinder pivot joints; a review of the maintenance program documentation to verify that certain lubrication tasks are incorporated; repetitive inspections of the MLG inner cylinder pivot pins and inner cylinder bushings of the MLG truck beams and inner cylinder joints to detect friction, heat damage, excessive wear, cracking, and smearing of bushing material; and applicable on-condition actions. The FAA is issuing this AD to address the unsafe condition on these products.
Which aircraft AD 2022-02-14 applies to
Applies to airplanes identified in Boeing Alert Requirements Bulletin B787-81205-SB320045-00 RB, Issue 001, dated November 9, 2020.
Whether AD 2022-02-14 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.