Is AD 2021-26-04 a recurring Airworthiness Directive?

Yes — AD 2021-26-04 requires a repetitive inspection. Next-due depends on the aircraft's time in service.

Which aircraft does AD 2021-26-04 apply to?

AD 2021-26-04 applies to Engine Alliance — models GP7270, GP7277, GP7000. Serial/part conditions may narrow it to specific aircraft.

Airworthiness Directive 2021-26-04

recurring

Official AD 2021-26-04 · FR doc 2021-27981 · 2021-12-28 · turbine engine

Airworthiness Directives; Engine Alliance Turbofan Engines

What this AD requires

The FAA is superseding Airworthiness Directive (AD) 2019-18-08 which applied to all Engine Alliance (EA) GP7270 and GP7277 model turbofan engines. AD 2019-18-08 required a visual inspection of the engine fan hub assembly, initial and repetitive eddy current inspections (ECIs) of the engine fan hub blade slot bottom and blade slot front edge for cracks, and replacement of the engine fan hub blade lock assembly for certain affected engines. This AD continues to require initial and repetitive ECIs and adds an ultrasonic test (UT) inspection. This AD also lowers the repetitive ECI threshold, and requires an independent inspection of the engine fan hub assembly at the next disassembly and the next reassembly of the engine fan hub blade lock assembly and a visual inspection of the engine fan hub assembly for damage. This AD also requires replacement of the engine fan hub assembly with a part eligible for installation if damage is found outside serviceable limits. This AD was prompted by an uncontained failure of the engine fan hub. The FAA is issuing this AD to address the unsafe condition on these products.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2021-26-04 applies to

MakesEngine Alliance

ModelsGP7270, GP7277, GP7000

Whether AD 2021-26-04 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.

Date — When the work was done.

Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.

Signature & certificate — The A&P/IA who returned it to service, with certificate number.

Is AD 2021-26-04 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.