Airworthiness Directive 2021-23-51
one-timeAirworthiness Directives; General Electric Company Turbofan Engines
What this AD requires
The FAA is adopting a new airworthiness directive (AD) for certain General Electric Company (GE) CF34-8C and CF34-8E model turbofan engines. This AD was prompted by an in-flight shutdown of an engine and subsequent investigation by the manufacturer that revealed a broken variable geometry (VG) actuator rod end caused by corrosion and seizure of the rod end bearing. This AD requires performing an inspection of the master compressor VG actuator and slave compressor VG actuator and, depending on the results of the inspection, replacement of the part with a part eligible for installation. This AD also requires reporting the results of the inspection to GE. The FAA previously sent an emergency AD to all known U.S. owners and operators of these GE CF34-8C and CF34-8E model turbofan engines and is now issuing this AD to address the unsafe condition on these products.
Which aircraft AD 2021-23-51 applies to
Applies only to engines installed on an airplane that has accumulated more than 250 parked days outdoors in the last 24 months within 10 miles (16 km) of a saltwater coastline. A 'parked day' is 24 consecutive hours with no engine operation.
Whether AD 2021-23-51 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.