Airworthiness Directive 2021-20-05

one-time
Official AD 2021-20-05 · FR doc 2021-22465 · 2021-10-18 · airframe

Airworthiness Directives; Leonardo S.p.a. Helicopters

What this AD requires

The FAA is adopting a new airworthiness directive (AD) for certain Leonardo S.p.a Model AW189 helicopters. This AD was prompted by a report of an incorrect connection of the inflation hoses to the tee manifolds of the inflation line on the emergency flotation system (EFS) assembly. This AD requires visually inspecting the yellow sleeves and hoses installed on each EFS assembly and depending on the inspection results, accomplishing the corrective actions in the applicable service information as specified in a European Aviation Safety Agency (now European Union Aviation Safety Agency) (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.

Which aircraft AD 2021-20-05 applies to

MakesLeonardo S.P.A.
ModelsAW189

Applies only when the affected emergency flotation system (EFS) assembly defined in EASA AD 2018-0279, dated December 14, 2018, is installed.

Whether AD 2021-20-05 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of complianceThe specific action taken (inspected, replaced, modified) and to what revision.
DateWhen the work was done.
Aircraft timeTotal time in service / tach at compliance — how recurring next-due is computed.
Signature & certificateThe A&P/IA who returned it to service, with certificate number.
Is AD 2021-20-05 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.