Is AD 2021-02-15 a recurring Airworthiness Directive?

Yes — AD 2021-02-15 requires a repetitive inspection. Next-due depends on the aircraft's time in service.

Which aircraft does AD 2021-02-15 apply to?

AD 2021-02-15 applies to Boeing — models 747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747-400. Serial/part conditions may narrow it to specific aircraft.

Airworthiness Directive 2021-02-15

recurring

Official AD 2021-02-15 · FR doc 2021-03593 · 2021-02-23 · airframe

Airworthiness Directives; The Boeing Company Airplanes

What this AD requires

The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 747-100, 747-100B, 747-100B SUD, 747- 200B, 747-200C, 747-200F, 747-300, 747-400, 747-400D, 747-400F, and 747SR series airplanes. This AD was prompted by reports of inboard foreflap departures from the airplane. This AD requires repetitive replacement of certain parts; a general visual inspection to determine production configuration for certain parts; a repetitive lubrication of certain parts and a repetitive general visual inspection of certain parts for any exuding grease; repetitive detailed inspections of certain parts for loose or missing attachment bolts, cracks or bushing migration, cracks or gouges, or broken, binding, or missing rollers; repetitive detailed inspections of certain parts for cracks or corrosion; repetitive lubrication; and on-condition actions if necessary. The FAA is issuing this AD to address the unsafe condition on these products.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2021-02-15 applies to

MakesBoeing

Models747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747-400, 747-400D, 747-400F, 747SR, 747

Applies to airplanes identified in Boeing Alert Requirements Bulletin 747-57A2367 RB, dated November 15, 2019.

Whether AD 2021-02-15 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.

Date — When the work was done.

Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.

Signature & certificate — The A&P/IA who returned it to service, with certificate number.

Is AD 2021-02-15 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.