Airworthiness Directive 2021-01-04
one-timeAirworthiness Directives; The Boeing Company Airplanes
What this AD requires
The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 737 series airplanes, excluding Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. This AD was prompted by reports of cracked or completely severed lugs in the upper aft corner stop fitting assembly of the forward entry door. This AD requires an inspection, a measurement, or a records check of that assembly to determine the part number, and replacement if a certain part is found. The FAA is issuing this AD to address the unsafe condition on these products.
Which aircraft AD 2021-01-04 applies to
Applies to all Model 737 series airplanes except 737-100, -200, -200C, -300, -400, and -500 series airplanes. For airplanes on which STC ST00830SE is installed, a change-in-product alternative method of compliance provision applies per paragraph (c)(2).
Whether AD 2021-01-04 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.