TailplateTailplate
Run a report

Airworthiness Directive 2020-22-06

recurring
Official AD 2020-22-06 · FR doc 2020-24642 · 2020-11-09 · airframe

Airworthiness Directives; Airbus SAS Airplanes

What this AD requires

The FAA is superseding Airworthiness Directive (AD) 99-01-19 and AD 2004-25-02, which applied to certain Airbus SAS Model A320 series airplanes. AD 99-01-19 and AD 2004-25-02 required repetitive inspections to detect fatigue cracking in certain areas of the fuselage, and corrective action if necessary. AD 2004-25-02 also provided an optional terminating action for the repetitive inspections. This AD continues to require, for certain airplanes, repetitive inspections of the fastener holes for any cracking, and repair if necessary, and provides an optional terminating action for the fastener hole inspections. This AD also revises the applicability to include additional airplanes and requires, for all airplanes, inspections of the emergency exit door structure for any cracking and repair if necessary; as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. This AD was prompted by a report that during full scale tests to support the Model A320 structure extended service goal (ESG) exercise, several cracks were found on both sides of the overwing emergency exit door cut-outs at fuselage section 15. The FAA is issuing this AD to address the unsafe condition on these products.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2020-22-06 applies to

MakesAirbus Sas
ModelsA319-111, A319-112, A319-113, A319-114, A319-115, A319-131, A319-132, A319-133, A320-211, A320-212, A320-214, A320-216, A320-231, A320-232, A320-233, A319, A320

Applies to airplanes as identified in EASA AD 2020-0040R1, dated June 16, 2020

Whether AD 2020-22-06 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD 2020-22-06 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.