Is AD 2020-20-13 a recurring Airworthiness Directive?

No — AD 2020-20-13 is a one-time directive. Verify it was complied with in the aircraft's records.

Airworthiness Directive 2020-20-13

Q: Which aircraft does AD 2020-20-13 apply to?

AD 2020-20-13 applies to General Electric Company (Ge) — models CF6-80A, CF6-80A1, CF6-80A2, CF6-80A3, CF6-80C2A1, CF6-80C2A2, CF6-80C2A3, CF6-80C2A5. Serial/part conditions may narrow it to specific aircraft.

one-time

Official AD 2020-20-13 · FR doc 2020-22038 · 2020-10-07 · turbine engine

Airworthiness Directives; General Electric Company Turbofan Engines

What this AD requires

The FAA is superseding Airworthiness Directive (AD) 2018-15-04 for certain General Electric Company (GE) CF6-80A, CF6-80A1, CF6-80A2, CF6-80A3, CF6-80C2A1, CF6-80C2A2, CF6-80C2A3, CF6-80C2A5, CF6-80C2A5F, CF6-80C2A8, CF6-80C2B1, CF6-80C2B1F, CF6-80C2B2, CF6-80C2B2F, CF6- 80C2B4, CF6-80C2B4F, CF6-80C2B5F, CF6-80C2B6, CF6-80C2B6F, CF6- 80C2B6FA, CF6-80C2B7F, CF6-80C2D1F, CF6-80C2L1F, and CF6-80C2K1F model turbofan engines. AD 2018-15-04 required ultrasonic inspection (UI) of high-pressure turbine (HPT) stage 1 and stage 2 disks. This AD retains the required inspections while expanding the population of affected HPT disks. This AD was prompted by an uncontained failure of an HPT stage 2 disk and the manufacturer's determination to expand the population of affected HPT disks. The FAA is issuing this AD to address the unsafe condition on these products.

Which aircraft AD 2020-20-13 applies to

MakesGeneral Electric Company (Ge)

ModelsCF6-80A, CF6-80A1, CF6-80A2, CF6-80A3, CF6-80C2A1, CF6-80C2A2, CF6-80C2A3, CF6-80C2A5, CF6-80C2A5F, CF6-80C2A8, CF6-80C2B1, CF6-80C2B1F, CF6-80C2B2, CF6-80C2B2F, CF6-80C2B4, CF6-80C2B4F, CF6-80C2B5F, CF6-80C2B6, CF6-80C2B6F, CF6-80C2B6FA, CF6-80C2B7F, CF6-80C2D1F, CF6-80C2L1F, CF6-80C2K1F, CF6-80C2

Applies only to engines with HPT disks with serial numbers listed in Tables 1 and 2 of Appendix A in GE CF6-80C2 SB 72-1562 R04 (dated May 29, 2019), and Table 1 of Appendix A in GE CF6-80A SB 72-0869 R02 (dated May 29, 2019).

Whether AD 2020-20-13 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.

Date — When the work was done.

Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.

Signature & certificate — The A&P/IA who returned it to service, with certificate number.

Is AD 2020-20-13 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.