Airworthiness Directive 2020-12-15

one-time
Official AD 2020-12-15 · FR doc 2020-14779 · 2020-07-09 · airframe

Airworthiness Directives; Bombardier, Inc., Airplanes

What this AD requires

The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-1A10 and BD-700-1A11 airplanes. This AD was prompted by a report that certain safety valves at the left- and right-hand sides of the cabin pressure control system were not installed correctly and that the trunnion nuts used to fasten the V-band clamp were over torqued. This AD requires a measurement of the trunnion nut torque of the V-band clamp, an inspection of the safety valve and airplane bulkhead flange area for any cracking and deformations, and corrective actions, if necessary. The FAA is issuing this AD to address the unsafe condition on these products.

Which aircraft AD 2020-12-15 applies to

ModelsBD-700-1A10, BD-700-1A11, BD-700
Serial-conditional — narrows to serials 9810–9838, 9840–9842, 9844–9846, 9854–9854, 9855–9855.

Whether AD 2020-12-15 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of complianceThe specific action taken (inspected, replaced, modified) and to what revision.
DateWhen the work was done.
Aircraft timeTotal time in service / tach at compliance — how recurring next-due is computed.
Signature & certificateThe A&P/IA who returned it to service, with certificate number.
Is AD 2020-12-15 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.