TailplateTailplate
Run a report

Airworthiness Directive 2020-10-03

recurring
Official AD 2020-10-03 · FR doc 2020-09938 · 2020-05-11 · airframe

Airworthiness Directives; Weatherly Aircraft Company

What this AD requires

The FAA is adopting a new airworthiness directive (AD) for all Weatherly Aircraft Company (Weatherly) Models 201, 201A, 201B, 201C, 620, 620A, 620B, 620B-TG, and 620TP airplanes. This AD was prompted by reports of fatigue cracking of the center wing and outer wing spar hinge brackets due to corrosion pitting. This AD requires repetitive inspections of the wing hinge brackets, pins, and wing spar structure with repair or replacement of parts as necessary. The FAA is issuing this AD to address the unsafe condition on these products.

Repetitive inspection. Re-inspect every 3 months. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2020-10-03 applies to

MakesWeatherly Aircraft Company
Models201, 201A, 201B, 201C, 620, 620A, 620B, 620B-TG, 620TP

Applies to all serial numbers of these models.

Whether AD 2020-10-03 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD 2020-10-03 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.