TailplateTailplate
Run a report

Airworthiness Directive 2020-05-24

one-time
Official AD 2020-05-24 · FR doc 2020-05709 · 2020-03-20 · airframe

Airworthiness Directives; The Boeing Company Airplanes

What this AD requires

The FAA is superseding Airworthiness Directive (AD) 2010-26- 01, which applied to certain The Boeing Company Model 777-200 series airplanes. AD 2010-26-01 required installing a new insulation blanket on the latch beam firewall of each thrust reverser (T/R) half. This AD requires retaining the requirements of 2010-26-01. This AD also adds airplanes to the applicability. For those airplanes, this AD requires an inspection to determine if the installed T/R has an affected part number and, if an affected part number is found, installation of a new insulation blanket. This AD was prompted by a report of an in-flight shutdown due to an engine fire indication and a determination that additional airplanes are affected. The FAA is issuing this AD to address the unsafe condition on these products.

Which aircraft AD 2020-05-24 applies to

MakesBoeing
Models777-200, 777

Applies only to 777-200 series airplanes equipped with General Electric GE90-76B, GE90-85B, GE90-90B, or GE90-94B engines.

Whether AD 2020-05-24 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD 2020-05-24 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.