TailplateTailplate
Run a report

Airworthiness Directive 2020-01-17

recurring
Official AD 2020-01-17 · FR doc 2020-01634 · 2020-01-30 · airframe

Airworthiness Directives; Airbus SAS Airplanes

What this AD requires

The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A318 series airplanes; Model A319 series airplanes; Model A320 series airplanes; and Model A321 series airplanes. This AD was prompted by a report that during airplane boarding a loud bang was heard. A subsequent inspection revealed that one emergency escape slide/raft was found with zero reservoir pressure, due to a burst rupture disk assembly in the inflation reservoir, which was probably caused by a manufacturing defect. This AD requires repetitive checks of the pressure gauges on the inflation reservoir of each emergency escape slide/raft to determine the amount of pressure and, depending on findings, accomplishment of applicable corrective actions, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2020-01-17 applies to

MakesAirbus Sas
ModelsA318-111, A318-112, A318-121, A318-122, A319-111, A319-112, A319-113, A319-114, A319-115, A319-131, A319-132, A319-133, A319-151N, A319-171N, A320-211, A320-212, A320-214, A320-216, A320-231, A320-232, A320-233, A320-251N, A320-252N, A320-253N, A320-271N, A320-272N, A320-273N, A321-111, A321-112, A321-131, A321-211, A321-212, A321-213, A321-231, A321-232, A321-251N, A321-252N, A321-253N, A321-271N, A321-272N, A321-251NX, A321-252NX, A321-253NX, A321-271NX, A321-272NX, A318, A319, A320, A321

Whether AD 2020-01-17 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD 2020-01-17 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.