TailplateTailplate
Run a report

Airworthiness Directive 2019-22-06

one-time
Official AD 2019-22-06 · FR doc 2019-25474 · 2019-11-25 · airframe

Airworthiness Directives; The Boeing Company Airplanes

What this AD requires

The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 737-800 series airplanes. This AD was prompted by reports of inadequate clearance between a certain fuel quantity indicating system (FQIS) tank unit and a certain reinforcement angle added as a part of a certain split winglet modification. This AD requires a detailed inspection to measure the clearance between the FQIS tank unit and a certain reinforcement angle installed as a part of the split winglet modification, and repair if necessary. The FAA is issuing this AD to address the unsafe condition on these products.

Which aircraft AD 2019-22-06 applies to

MakesBoeing
Models737-800, 737
Serial-conditional — narrows to serials 4919–5063.

Line numbers 4919 through 5063 inclusive, modified with split winglets per STC ST00830SE and listed in Aviation Partners Boeing Service Bulletin AP737-57-020, dated April 5, 2018.

Whether AD 2019-22-06 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD 2019-22-06 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.