TailplateTailplate
Run a report

Airworthiness Directive 2019-20-10

recurring
Official AD 2019-20-10 · FR doc 2019-24508 · 2019-11-13 · airframe

Airworthiness Directives; Airbus SAS Airplanes

What this AD requires

The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A318 and A319 series airplanes, Model A320- 211, -212, -214, -216, -231, -232, and -233 airplanes, and Model A321- 111, -112, -131, -211, -212, -213, -231, and -232 airplanes. This AD was prompted by a report that cracks were detected on frame (FR) 16 and FR 20 web holes and passenger door intercostal fitting holes at the door stop fitting locations. This AD requires repetitive rototest inspections of the holes at the door stop fittings for any cracking, and corrective actions if necessary, as specified in a European Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2019-20-10 applies to

MakesAirbus
ModelsA318-111, A318-112, A318-121, A318-122, A319-111, A319-112, A319-113, A319-114, A319-115, A319-131, A319-132, A319-133, A320-211, A320-212, A320-214, A320-216, A320-231, A320-232, A320-233, A321-111, A321-112, A321-131, A321-211, A321-212, A321-213, A321-231, A321-232, A318, A319, A320, A321

Applies to airplanes identified in EASA AD 2018-0289, dated December 21, 2018.

Whether AD 2019-20-10 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD 2019-20-10 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.