Is AD 2019-19-17 a recurring Airworthiness Directive?

Yes — AD 2019-19-17 requires a repetitive inspection every 12 months. Next-due depends on the aircraft's time in service.

Airworthiness Directive 2019-19-17

Q: Which aircraft does AD 2019-19-17 apply to?

AD 2019-19-17 applies to Airbus — models A300 B4-601, A300 B4-603, A300 B4-620, A300 B4-622, A300 B4-605R, A300 B4-622R, A300 F4-605R, A300 C4-605R Variant F. Serial/part conditions may narrow it to specific aircraft.

recurring

Official AD 2019-19-17 · FR doc 2019-22152 · 2019-10-10 · airframe

Airworthiness Directives; Airbus SAS Airplanes

What this AD requires

The FAA is superseding Airworthiness Directive (AD) 2000-03-20 R1, which applied to all Airbus SAS Model A300 B4-601, B4-603, and B4- 620, Model A300 B4-600R series, and Model A300 F4-605R airplanes. AD 2000-03-20 R1 required repetitive inspections to detect cracks on the forward fittings in the radius of a certain frame, adjacent to the tension bolts in the center section of the wings, and various follow-on actions. This AD retains the requirements of AD 2000-03-20 R1, adds new airplanes to the applicability, and introduces new compliance times for the required inspections, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. This AD was prompted by reports of cracking due to fatigue-related stress in the radius of frame 40, adjacent to the tension bolts at the center/ outer wing junction. The FAA is issuing this AD to address the unsafe condition on these products.

Repetitive inspection. Re-inspect every 12 months. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2019-19-17 applies to

MakesAirbus

ModelsA300 B4-601, A300 B4-603, A300 B4-620, A300 B4-622, A300 B4-605R, A300 B4-622R, A300 F4-605R, A300 C4-605R Variant F, A300

Applies to airplanes identified in EASA AD 2019-0044, dated March 7, 2019.

Whether AD 2019-19-17 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.

Date — When the work was done.

Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.

Signature & certificate — The A&P/IA who returned it to service, with certificate number.

Is AD 2019-19-17 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.