Airworthiness Directive 2019-19-11
recurringAirworthiness Directives; Pratt & Whitney Turbofan Engines
What this AD requires
The FAA is adopting a new airworthiness directive (AD) for certain Pratt & Whitney (PW) PW1519G, PW1521G, PW1521GA, PW1524G, PW1525G, PW1521G-3, PW1524G-3, PW1525G-3, PW1919G, PW1921G, PW1922G, PW1923G, and PW1923G-A model turbofan engines. This AD requires initial and repetitive inspections of the low-pressure compressor (LPC) inlet guide vane (IGV) and the LPC rotor 1 (R1) and, depending on the results of the inspections, possible replacement of the LPC. This AD was prompted by two recent in-flight shutdowns (IFSDs) that occurred as the result of failures of the LPC R1. The FAA is issuing this AD to address the unsafe condition on these products.
Which aircraft AD 2019-19-11 applies to
Applies only to engines that have accumulated fewer than 300 flight cycles.
Whether AD 2019-19-11 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.