TailplateTailplate
Run a report

Airworthiness Directive 2019-18-04

recurring
Official AD 2019-18-04 · FR doc 2019-20755 · 2019-09-25 · airframe

Airworthiness Directives; Airbus SAS Airplanes

What this AD requires

The FAA is superseding Airworthiness Directive (AD) 2005-17- 14, which applied to all Airbus SAS Model A300 series airplanes; Model A300 B4-600, B4-600R, and F4-600R series airplanes, and Model A300 C4- 605R Variant F airplanes (collectively called Model A300-600 series airplanes); and Model A310 series airplanes. AD 2005-17-14 required repetitive tests to detect desynchronization of the rudder servo actuators, and adjustment or replacement of the spring rods of the rudder servo actuators, if necessary. AD 2005-17-14 also required repetitive tests/inspections/analyses of the rudder servo actuators, and related investigative/corrective actions if necessary. This AD retains some requirements of AD 2005-17-14 and revises the inspection procedures and compliance times, as specified in a European Aviation Safety Agency (EASA) AD, which is incorporated by reference. This AD was prompted by reports of desynchronization of the rudder servo actuators. The FAA is issuing this AD to address the unsafe condition on these products.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2019-18-04 applies to

MakesAirbus
ModelsA300 B2-1A, A300 B2-1C, A300 B2K-3C, A300 B2-203, A300 B4-2C, A300 B4-103, A300 B4-203, A300 B4-601, A300 B4-603, A300 B4-620, A300 B4-622, A300 B4-605R, A300 B4-622R, A300 F4-605R, A300 F4-622R, A300 C4-605R Variant F, A310-203, A310-204, A310-221, A310-222, A310-304, A310-322, A310-324, A310-325, A300, A310

Applies to airplanes identified in EASA AD 2019-0017, dated January 29, 2019.

Whether AD 2019-18-04 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD 2019-18-04 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.