TailplateTailplate
Run a report

Airworthiness Directive 2019-18-03

recurring
Official AD 2019-18-03 · FR doc 2019-20184 · 2019-09-18 · airframe

Airworthiness Directives; The Boeing Company Airplanes

What this AD requires

The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 737 series airplanes, excluding Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. This AD requires revising the existing maintenance or inspection program to remove text that allows the size of the thrust reverser upper locking actuator lock sensor target to be changed, and, for certain airplanes, performing repetitive integrity tests of the thrust reverser upper locking actuator. This AD was prompted by a report indicating that alteration of thrust reverser upper locking actuators in accordance with certain data in the Boeing aircraft maintenance manual (AMM) could delay or prevent detection of the failure of the locking mechanism of a thrust reverser upper locking actuator. The FAA is issuing this AD to address the unsafe condition on these products.

Repetitive inspection. Re-inspect every 750 hours. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2019-18-03 applies to

MakesBoeing
Models737

Applies to all 737 series airplanes excluding Model 737-100, -200, -200C, -300, -400, and -500 series airplanes.

Whether AD 2019-18-03 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD 2019-18-03 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.