TailplateTailplate
Run a report

Airworthiness Directive 2019-16-07

recurring
Official AD 2019-16-07 · FR doc 2019-19913 · 2019-09-17 · airframe

Airworthiness Directives; Airbus SAS Airplanes

What this AD requires

The FAA is superseding Airworthiness Directive (AD) 2016-12- 09, which applied to certain Airbus Model A330-200, -200 Freighter, and -300 series airplanes; and Model A340-200 and -300 series airplanes. AD 2016-12-09 requirements included removing existing and installing new fasteners, inspecting for and, if necessary, repairing cracking. This new AD requires repetitive inspections of the fastener holes at a certain frame and applicable on-condition actions, and, for certain airplanes, requires a modification, as specified in European Union Aviation Safety Agency (EASA) ADs, which are incorporated by reference. Also as specified in the EASA ADs, this AD also provide an optional terminating action for certain airplanes, which terminates the inspections. This AD was prompted by reports that cracks were found on an adjacent hole of certain frames of the center wing box (CWB) and a determination that the compliance time specified in AD 2016-12-09 for the modification of the inside CWB must be revised. The FAA is issuing this AD to address the unsafe condition on these products.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2019-16-07 applies to

MakesAirbus
ModelsA330-201, A330-202, A330-203, A330-223, A330-243, A330-223F, A330-243F, A330-301, A330-302, A330-303, A330-321, A330-322, A330-323, A330-341, A330-342, A330-343, A340-211, A340-212, A340-213, A340-311, A340-312, A340-313, A330, A340

Whether AD 2019-16-07 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD 2019-16-07 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.