TailplateTailplate
Run a report

Airworthiness Directive 2019-03-10

recurring
Official AD 2019-03-10 · FR doc 2019-02938 · 2019-02-22 · airframe

Airworthiness Directives; Airbus SAS Airplanes

What this AD requires

We are superseding Airworthiness Directive (AD) 2017-07-05, which applied to all Airbus SAS Model A300 series airplanes; and Model A300 B4-600, B4-600R, and F4-600R series airplanes, and Model A300 C4- 605R Variant F airplanes (collectively called Model A300-600 series airplanes). AD 2017-07-05 required repetitive detailed visual inspections of the main landing gear (MLG) leg components and replacement of the MLG leg if cracked components are found. This AD retains the requirements of AD 2017-07-05 and removes the credit for doing an MLG overhaul in lieu of the initial inspection of the MLG leg components. This AD was prompted by further investigation after AD 2017-07-05 was issued, which revealed that overhaul of the MLG does not alleviate the need for inspecting the MLG hinge arm/barrel pin for cracking. We are issuing this AD to address the unsafe condition on these products.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2019-03-10 applies to

MakesAirbus Sas
ModelsA300 B2-1A, A300 B2-1C, A300 B2K-3C, A300 B2-203, A300 B4-2C, A300 B4-103, A300 B4-203, A300 B4-601, A300 B4-603, A300 B4-620, A300 B4-622, A300 B4-605R, A300 B4-622R, A300 F4-605R, A300 F4-622R, A300 C4-605R Variant F, A300

Applies to all manufacturer serial numbers.

Whether AD 2019-03-10 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD 2019-03-10 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.