TailplateTailplate
Run a report

Airworthiness Directive 2018-25-08

recurring
Official AD 2018-25-08 · FR doc 2018-26533 · 2018-12-28 · airframe

Airworthiness Directives; Airbus SAS Airplanes

What this AD requires

We are superseding Airworthiness Directive (AD) 2017-22-07, which applied to certain Airbus SAS Model A319 series airplanes; Model A320-211,-212, -214, -231, -232, and -233 airplanes; and Model A321- 111, -112, -131, -211, -212, -213, -231, and -232 airplanes. AD 2017- 22-07 required repetitive inspections of the frame forks, and corrective actions if necessary. AD 2017-22-07 also included optional modifications that constituted terminating action. This AD requires modifying certain forward and aft cargo compartment doors, and related investigative and corrective actions. This AD was prompted by an evaluation done by the design approval holder indicating that certain areas of certain cargo compartment doors are subject to widespread fatigue damage, and a determination was made that a modification of the frame forks must be done. We are issuing this AD to address the unsafe condition on these products.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2018-25-08 applies to

MakesAirbus Sas
ModelsA319-111, A319-112, A319-113, A319-114, A319-115, A319-131, A319-132, A319-133, A320-211, A320-212, A320-214, A320-216, A320-231, A320-232, A320-233, A321-111, A321-112, A321-131, A321-211, A321-212, A321-213, A321-231, A321-232, A319, A320, A321
Serial-conditional — narrows to serials 1–0758.

Applies to airplanes with manufacturer serial numbers through 0758 inclusive.

Whether AD 2018-25-08 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD 2018-25-08 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.