Is AD 2018-23-02 a recurring Airworthiness Directive?

Yes — AD 2018-23-02 requires a repetitive inspection every 20 months. Next-due depends on the aircraft's time in service.

Which aircraft does AD 2018-23-02 apply to?

AD 2018-23-02 applies to Airbus — models A318-111, A318-112, A318-121, A318-122, A319-111, A319-112, A319-113, A319-114. Serial/part conditions may narrow it to specific aircraft.

Airworthiness Directive 2018-23-02

recurring

Official AD 2018-23-02 · FR doc 2018-24486 · 2018-11-23 · airframe

Airworthiness Directives; Airbus SAS Airplanes

What this AD requires

We are adopting a new airworthiness directive (AD) for all Airbus SAS Model A318 and A319 series airplanes; Model A320-211, A320- 212, A320-214, A320-216, A320-231, A320-232, and A320-233 airplanes; and Model A321-111, A321-112, A321-131, A321-211, A321-212, A321-213, A321-231, and A321-232 airplanes. This AD was prompted by reports of missing assembly hardware on the trimmable horizontal stabilizer actuator (THSA). This AD requires repetitive inspections and checks of the lower and upper THSA attachments and applicable related investigative and corrective actions; a one-time inspection of the THSA lower attachment and replacement as applicable; and, for certain airplanes, activation of the electrical load sensing device (ELSD) and concurrent modifications. We are issuing this AD to address the unsafe condition on these products.

Repetitive inspection. Re-inspect every 20 months. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2018-23-02 applies to

MakesAirbus

ModelsA318-111, A318-112, A318-121, A318-122, A319-111, A319-112, A319-113, A319-114, A319-115, A319-131, A319-132, A319-133, A320-211, A320-212, A320-214, A320-216, A320-231, A320-232, A320-233, A321-111, A321-112, A321-131, A321-211, A321-212, A321-213, A321-231, A321-232, A318, A319, A320, A321

Applies to all manufacturer serial numbers.

Whether AD 2018-23-02 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.

Date — When the work was done.

Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.

Signature & certificate — The A&P/IA who returned it to service, with certificate number.

Is AD 2018-23-02 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.