Airworthiness Directive 2018-18-13
recurringAirworthiness Directives; The Boeing Company Airplanes
What this AD requires
We are adopting a new airworthiness directive (AD) for all The Boeing Company Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. This AD was prompted by reports of cracking in certain flanges, and the adjacent web, of the wing outboard flap track at certain positions, and a determination that new inspections of certain flap track flanges and webs forward of the rear spar attachment are necessary. This AD requires an inspection to determine the part number of the wing outboard flap track assembly; repetitive inspections of each affected wing outboard flap track for discrepancies, and applicable on-condition actions; and repetitive overhaul of each wing outboard flap track. We are issuing this AD to address the unsafe condition on these products.
Which aircraft AD 2018-18-13 applies to
Installation of Supplemental Type Certificate (STC) ST01219SE does not affect applicability; for airplanes on which STC ST01219SE is installed, a change-in-product AMOC approval request is not necessary.
Whether AD 2018-18-13 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.