Airworthiness Directive 2018-15-04
one-timeAirworthiness Directives; General Electric Company Turbofan Engines
What this AD requires
We are adopting a new airworthiness directive (AD) for certain General Electric Company (GE) CF6-80A, CF6-80A1, CF6-80A2, CF6-80A3, CF6-80C2A1, CF6-80C2A2, CF6-80C2A3, CF6-80C2A5, CF6-80C2A5F, CF6- 80C2A8, CF6-80C2B1, CF6-80C2B1F, CF6-80C2B2, CF6-80C2B2F, CF6-80C2B4, CF6-80C2B4F, CF6-80C2B5F, CF6-80C2B6, CF6-80C2B6F, CF6-80C2B6FA, CF6- 80C2B7F, CF6-80C2D1F, CF6-80C2L1F, and CF6-80C2K1F turbofan engines. This AD was prompted by an uncontained failure of a high-pressure turbine (HPT) stage 2 disk that resulted in a fire. This AD requires ultrasonic inspection (UI) of HPT stage 1 and 2 disks. We are issuing this AD to address the unsafe condition on these products.
Which aircraft AD 2018-15-04 applies to
Applies only when a high-pressure turbine (HPT) disk with a serial number listed in Table 1 and 2 of GE CF6-80C2 Service Bulletin (SB) 72-1562 R03, dated January 10, 2018, or Table 1 of GE CF6-80A SB 72-0869 R01, dated October 19, 2017, is installed.
Whether AD 2018-15-04 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.