Is AD 2018-16-12 a recurring Airworthiness Directive?

No — AD 2018-16-12 is a one-time directive. Verify it was complied with in the aircraft's records.

Which aircraft does AD 2018-16-12 apply to?

AD 2018-16-12 applies to Airbus — models A319-111, A319-112, A319-113, A319-114, A319-115, A319-131, A319-132, A319-133. Serial/part conditions may narrow it to specific aircraft.

Airworthiness Directive 2018-16-12

one-time

Official AD 2018-16-12 · FR doc 2018-16736 · 2018-08-08 · airframe

Airworthiness Directives; Airbus Airplanes

What this AD requires

We are adopting a new airworthiness directive (AD) for certain Airbus Model A319 and A320 series airplanes; and A321-111, -112, -131, -211, -212, -213, -231, and -232 airplanes. This AD was prompted by reports of battery retaining rod failures due to quality defects of the material used during parts manufacturing. This AD requires a detailed inspection of the battery support assemblies to identify the battery retaining rod manufacturer, replacement of the battery retaining rods with serviceable battery retaining rods if necessary, and the addition of the applicable service information label on each battery retaining rod if necessary. We are issuing this AD to address the unsafe condition on these products.

Which aircraft AD 2018-16-12 applies to

MakesAirbus

ModelsA319-111, A319-112, A319-113, A319-114, A319-115, A319-131, A319-132, A319-133, A320-211, A320-212, A320-214, A320-216, A320-231, A320-232, A320-233, A320-251N, A320-271N, A321-111, A321-112, A321-131, A321-211, A321-212, A321-213, A321-231, A321-232, A319, A320, A321

Applies to airplanes identified in Airbus Service Bulletin A320-92-1116, Revision 00, dated January 31, 2017; or Airbus Service Bulletin A320-92-1118, Revision 00, dated January 31, 2017.

Whether AD 2018-16-12 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.

Date — When the work was done.

Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.

Signature & certificate — The A&P/IA who returned it to service, with certificate number.

Is AD 2018-16-12 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.