Airworthiness Directive 2018-14-06
recurringAirworthiness Directives; American Champion Aircraft Corp.
What this AD requires
We are superseding Airworthiness Directive (AD) (AD) 2017-07- 10 for certain American Champion Aircraft Corp. (ACAC) Model 8KCAB airplanes. AD 2017-07-10 required fabrication and installation of a placard to prohibit aerobatic flight, inspection of the aileron hinge rib and support, and a reporting requirement of the inspection results to the FAA. This AD requires repetitive inspections of the aileron hinge support, installation of the aileron hinge support reinforcement kit, and incorporation of revised pages into the service manual. This AD was prompted by a report of a cracked hinge support and cracked hinge ribs, which resulted in partial loss of control with the aileron binding against the cove. We are issuing this AD to address the unsafe condition on these products.
Which aircraft AD 2018-14-06 applies to
Applies to airplanes with a serial number in the specified ranges, OR that are equipped with part number 4-2142 exposed balance ailerons (either condition alone triggers applicability).
Whether AD 2018-14-06 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.