Is AD 2018-09-09 a recurring Airworthiness Directive?

No — AD 2018-09-09 is a one-time directive. Verify it was complied with in the aircraft's records.

Which aircraft does AD 2018-09-09 apply to?

AD 2018-09-09 applies to Airbus — models A318-111, A318-112, A318-121, A318-122, A319-111, A319-112, A319-113, A319-114. Serial/part conditions may narrow it to specific aircraft.

Airworthiness Directive 2018-09-09

one-time

Official AD 2018-09-09 · FR doc 2018-09280 · 2018-05-07 · airframe

Airworthiness Directives; Airbus Airplanes

What this AD requires

We are adopting a new airworthiness directive (AD) for certain Airbus Model A318 series airplanes and Model A319 series airplanes; all Model A320-211, -212, -214, -216, -231, -232, and -233 airplanes; and all Model A321-111, -112, -131, -211, -212, -213, -231, and -232 airplanes. This AD was prompted by an evaluation by the design approval holder (DAH) indicating that the holes of the upper cleat to upper stringer attachments at certain areas of the left- and right-hand wings are subject to widespread fatigue damage (WFD). This AD requires modifying the holes of the upper cleat to upper stringer attachments at certain areas of the left- and right-hand wings. We are issuing this AD to address the unsafe condition on these products.

Which aircraft AD 2018-09-09 applies to

MakesAirbus

ModelsA318-111, A318-112, A318-121, A318-122, A319-111, A319-112, A319-113, A319-114, A319-115, A319-131, A319-132, A319-133, A320-211, A320-212, A320-214, A320-216, A320-231, A320-232, A320-233, A321-111, A321-112, A321-131, A321-211, A321-212, A321-213, A321-231, A321-232, A318, A319, A320, A321

All manufacturer serial numbers except: (1) Model A318 series airplanes with Airbus Mod 39195 embodied in production or Airbus SB A320-00-1219 embodied in service; (2) Model A319 series airplanes with Airbus Mod 28238, Mod 28162, and Mod 28342 embodied in production.

Whether AD 2018-09-09 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.

Date — When the work was done.

Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.

Signature & certificate — The A&P/IA who returned it to service, with certificate number.

Is AD 2018-09-09 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.